机气量测定方法 of gas ofwater-ring vacuum pump and compressor
JB/T10134-1999 带真空泵交流发电机 技术条件 JB/T53019-1999 油扩散真空泵 产品质量分等 JB/T53022-1999 滑阀真空泵 产品质量分等
NF E51-291-1996 压缩机和真空泵.安全要求.第 (Compressors and vacuum pumps. Safety requirements
2部分:真空泵 . Part 2 : vacuum pumps.) NF E51-290-1996 压缩机和真空泵.安全要求. (Compressors and vacuum pumps. Safety requirements
第1部分:压缩机 . Part 1 : compressors.)
NF X10-501-1976 真空技术.词汇.真空泵 (Vacuum technology. Vocabulary. Vacuum pumps.)
ANSI/ASME PTC 9-1974 性能试验规范.容积式
压缩机、真空泵和鼓风机 (Performance Test Code - Displacement Compressors,
Vacuum Pumps and Blowers) ANSI/UL 1450-2003 电动空气压缩机、真空 (Motor-Operated Air Compressors, Vacuum
泵和涂漆设备 Pumps, and Painting Equipment )
ASME PTC 9 Erratum-1972 容积式压缩机, (Displacement compressors, vacuum pumps,
真空泵和鼓风机.正误表 and blowers; Erratum)
ASME PTC 9-1970 容积式压缩机,真空泵 (Displacement compressors, vacuum pumps, and blowers) 和鼓风机
BS EN 1012-1-1997 压缩机和真空泵.安全 (Compressors and vacuum pumps - Safety
要求.压缩机 requirements - Compressors) BS EN ISO 14847-1999 转式变容真空泵. (Rotary positive displacement pumps -
技术要求 Technical requirements)
BS EN 1012-2-1997 压缩机和真空泵.安 (Compressors and vacuum pumps - Safety requirements
全要求.真空泵 - Vacuum pumps)
EN 1012-1-1996 压缩机和真空泵 安全 Compressors and vacuum pumps - Safety
要求 第1部分：压缩机 requirements - Part 1: Compressors
EN 1012-2-1996 压缩机和真空泵 安全要 Compressors and vacuum pumps - Safety
求 第2部分：真空泵 requirements - Part 2: Vacuum pumps
DIN EN 1012-1-1996 压缩机和真空泵.安全 (Compressors and vacuum pumps, safety requirements -
要求.第1部分:压缩机 Part 1: Compressors; German version EN 1012-1:1996)
DIN EN 1012-2-1996 压缩机和真空泵.安全 (Compressors and vacuum
pumps, safety requirements
要求.第2部分:真空泵 - Part 2: Vacuum pumps; German version EN 1012-2:1996)
DIN 28432-1996 真空技术.膜片真空泵 (Vacuum technology - Acceptance specifications
的验收规则 for diaphragm vacuum pumps) DIN 45635-13-1977 机器噪声测量.空气载 (Measurement of airborne noise emitted by
声测量.包面法.空气压缩 machines; enveloping surface method,
机包括真空泵（活塞式. compressors, vacuum pumps included (displacement-,
涡轮式和喷射式压缩机） turbo- and jet compressors)) DIN 28426-2-1976 真空技术.旋转活塞真 (Vacuum technology; acceptance specifications
空泵的验收规则.高真空 for roots vacuum pumps for the range of medium vacuum)
范围内的摇杆式活塞真空泵
DIN 28400-2-1980 真空技术.名称和定义.真空泵 (Vacuum technology; terms and definitions,
vacuum pumps)
DIN ISO 3019-3-1984 液压传动.变容真空泵和 (Hydraulik fluid power; positive displacement
马达.装配法兰盘和轴端的尺寸 pumps and motors; dimensions and identification
及识别代码.第3部分:多边形法 code for mounting flanges and shaft ends; part
兰盘(包括圆形法兰盘) 3: polygonal flanges (including circular flanges))
DIN ISO 3019-2-1991 液压传动.变容真空泵和 (Hydraulic fluid power; positive displacement
马达.装配法兰盘和轴端的尺寸 pumps and motors; dimensions and identification
及识别代码.第2部分:两孔与四 code for mounting flanges and shaft ends;
孔法兰与轴端.米制系列 part 2: 2 and 4-hole flanges and shaft ends, metric
series; identical with ISO 3019-2:1986)
DIN 28426-1-1983 真空技术.旋转真空泵.在近 (Vacuum technology; acceptance specifications
似真空和高真空范围内的闭塞 for rotary plunger vacuum pumps, sliding vane
阀真空泵和旋转阀真空泵的验 rotary vacuum pumps and rotary piston vacuum
收规则 pumps for the ranges of rough and medium vacuum)
DIN 28431-1987 真空技术.液体环式真空泵的 (Vacuum technology; acceptance specifications
验收规程 for liquid ring vacuum pumps) DIN 28427-1983 真空技术.蒸气压低于1mbar的 (Vacuum technology; acceptance specifications for
扩散泵和蒸气喷射真空泵的验 diffusions pumps and vapour jet vacuum pumps
收规则 for vapour pressures of the pump fluid 1 mbar)
DIN 28430-1984 真空技术.以蒸汽作为驱动介 (Vacuum technology; rules for the measurement
质的蒸汽喷射真空泵和蒸汽 of steam jet vacuum pumps and steam jet
喷射压缩机用测量规则 compressors using steam as the working fluid)
JB/T6921-2004 罗茨真空泵机组 JB/T8540-2004 水蒸汽喷射真空泵 JB/T10462-2004 水喷射真空泵 JB/T7265-2004 蒸汽流真空泵
UL 1450-2003 电动空气压缩机、真空泵和喷 (Motor-operated air compressors, vacuum pumps
漆设备 , and painting equipment) JIS B8384-2000 液压.变容真空泵、机动泵 (Hydraulic fluid power -- Positive displacement
和整体传动装置.稳态性能测定 pumps, motors and integral transmissions --
Determination of steady-state performance)
JIS B8317-2-1999 蒸气真空泵.性能特性的
测定.第2部分:临界后压力的测定 (Vapour vacuum pumps --Measurement of performance
characteristics -- Part 2: Measurement of critical
backing pressure)
JIS B8323-2003 水封式真空泵 (Water ring vacuum pumps) JIS B8317-1-1999 蒸气真空泵.性能特性的测定 (Vapour vacuum pumps -- Measurement of performance
.第1部分:流量容积比率的测定(泵速) characteristics -- Part 1: Measurement of volume
rate of flow (pumping speed)) JIS B8385-2000 液压.变容真空泵、机动泵和整 (Hydraulic fluid power -- Pumps, motors and integral
体传动装置.参数定义和字母符号 transmission -- Parameter definitions and letter
symbols)
JIS Z8126-2-1999 真空技术.词汇.第2部分:真 (Vacuum technology -- Vocabulary -- Part 2:
空泵和相关条款 Vacuum pumps and related terms)
ISO 1607-2-1989 变容真空泵.性能特性测量. (Positive-displacement vacuum pumps; measurem
第2部分:极限压力的测量 ent of performance characteristics; part 2:
measurement of ultimate pressure) ISO 16330-2003 往复式变容真空泵和泵装置 (Reciprocating positive displacement pumps and
.技术要求 pump units - Technical requirements)
ISO 3529-2-1981 真空技术.词汇.第2部分: (Vacuum technology; Vocabulary; Part 2 : Vacuum
真空泵和有关术语.三种语言版 pumps and related terms Trilingual edition)
ISO 1608-2-1989 蒸汽真空泵.性能特性的测 (Vapour vacuum pumps; measurement of performance
量.第2部分:临界前级压力的测量 characteristics; part 2: measurement of critical
backing pressure)
ISO 1608-1-1993 蒸汽真空泵.性能特性的测量. (Vapour vacuum pumps; measurement of performance
第1部分:容积流量速度的测量(泵速) characteristics; part 1: me
asurement of volume
rate of flow (pumping speed)) QB/T1444-1992 ZBK型轻式专用两叶罗茨真空泵 QB/T1445-1992 湿式罗茨真空泵性能测试方法 JB/T6533-2005 旋片真空泵 JB/T7674-2005 罗茨真空泵 JB/T7675-2005 往复真空泵
GB/T19955.1-2005 蒸汽流真空泵性能测量方法 第1部分：体积流率(抽速)的测量
GB/T19955.2-2005 蒸汽流真空泵性能测量方法 第2部分：临界前级压力的测量
GB/T19956.1-2005 容积真空泵性能测量方法 第1部分：体积流率(抽速)的测量
GB/T19956.2-2005 容积真空泵性能测量方法 第2部分：极限压力的测量 JB/T8540-2004 水蒸汽喷射真空泵 JB/T10462-2004 水喷射真空泵
